Enabling an MFT Enterprise B2B Hub

This procedure describes how to enable an MFT Enterprise B2B Hub, which allows file transfers to and from the Control-M MFT Enterprise B2B Gateway. The MFT Enterprise B2B Hub uses the File Transfer Server to transfer files.

After the Hub is enabled, all File Transfer Server configuration is managed from the Hub Settings.

NOTE: You can enable one MFT Enterprise B2B Hub per Control-M/EM server.

To enable an MFT Enterprise B2B Hub:

  1. From the Manage tab, click MFT B2B.

    If the button is disabled, you need to install Control-M MFT B2B, as described in Control-M MFT Enterprise B2B installation.

    The MFT B2B window appears.

  2. Click Add Hub.
  3. Do the following:
    1. From the Select B2B hub environment drop-down list, select the host where Control-M MFT is installed.

      NOTE: You can only select a Control-M MFT 9.0.18 or higher that is installed on a Control-M/Agent 9.0.18 or higher.

    2. In the Gateway Authentication Password field, type the same password you used when you installed the Control-M MFT Enterprise B2B Gateway.
    3. In the Domain Name field, type the domain name of the MFT Enterprise B2B File Exchange website where external users can transfer using HTTP.

    EXAMPLE:www.example.com or 172.99.98.77:<HTTP_Port>

    1. In the Company Name field, type the name of your company.

      This name appears in the MFT Enterprise B2B File Exchange website and the email notification signature.

    2. In the Company Support Email field, type the email address that is used to send and receive email notifications to and from external users.
  4. Click Create.

    The MFT Enterprise B2B Hub is enabled.

Parent Topic

Control-M MFT Enterprise B2B